|
N8021 - back
to top
Room Call Unit, Assistance and Emergency Call. Call button, reset
button and reassurance indicator.
Size: 47 x 47 Fits standard electrical accessory box.
N8022 - back
to top
Room Call Unit, Assistance and Emergency Call. Call button, reset
button, reassurance indicator and jack socket for extension call point.
Size: 47 x 47 Fits standard electrical accessory box. 
N8007 - back
to top
Indicator Lamp Unit provides visual signal of a call, flashes
half second intervals for Emergency Calls and is continuously lit for
Assistance Calls.
Size: 47 x 47 Fits standard electrical accessory box.
N8008 - back
to top
Alarm, Call, Cancel Unit with key operalted reset switch and
reassurance indication.
Size: 47 x 47 Fits standard electrical accessory box.
N8009 - back
to top
Extension Sounder Unit providing audible call signalling. One
second every ten seconds for Assistance Calls and half second intervals
for Emergency Calls.
Size: 47 x 47 Fits standard electrical accessory box.
N8030 - back
to top
Extension Call Point fitted with 1.5 metre cable and right angle
jack plug. Plugs into call unit jack sockets.
N8031 - back
to top
Ceiling Mounted Pull Cord Unit fitted fith orange cord and two
triangular hand units with reassurance indicator. 
N8037 - back
to top
Extension Call Point Mounting Bracket.
N6000 - back
to top
Infra Red Call Units which may be interfaced to room call units
providing secure call facilities.
N5000 - back
to top
Radio Paging System available for connection to control unit
providing full call information on am alphanumeric display.
NCU/H850 - back
to top
System Controller with 2 x 16 character Alphanumeric Display,
Processor Controlled, Programmable Descriptions, RS485, RS232 Outputs
and Printer interface. An Audio output circuit with mute and isolation
controls.
Size: 320 x 245 x 63. Operating voltage: 24 Volts DC.
Enclosure: Metal. May be flush or surface mounted.
NCU/S80 - back
to top
Satellite Alphanumeric Display with 2 x 16 characters showing
the same information as the main display.
Size: 87 x 148 x 32. Fits standard electrical accessory box.
NCU/W80 - back
to top
Interface Unit connects up to 16 room or call inputs to the system.
Connected to the serial data bus.
Size: 230 x 310 x 80.
NCU/P80 - back
to top
Programmable Output Unit. 8 individually programmable DC. outputs
programmed to activate under specific system conditions connected to
RS485 data bus.
Size: 230 x 200 x 80.
NCPU/24 - back
to top
Power Supply Unit. System Power Unit provides regulated 24 volt
DC. 4 amp supply for the system.
Size: 230 x 310 x 80.
N8001 - back
to top
Room Call Unit, Assistance only. Call button,, reset button,
reassurance indicator.
Size: 47 x 47 Fits standard electrical accessory box.
N8002 - back
to top
Room Call Unit, Assistance only. Call button, reset button, reassurance
indicator and jack socket for an extension call point.
Size: 47 x 47 Fits standard electrical accessory box.
|
